No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring Multicast Routing and Forwarding

Monitoring Multicast Routing and Forwarding

Context

During routine maintenance, run the following commands in any view to check the running status of the multicast forwarding and routing tables.

Procedure

  • Run the display multicast [ vpn-instance vpn-instance-name | all-instance ] boundary [ group-address [ mask | mask-length ] ] [ interface interface-type interface-number ] command to check the multicast boundary configured on an interface.
  • Run the display multicast [ vpn-instance vpn-instance-name | all-instance ] forwarding-table [ group-address [ mask { group-mask | group-mask-length } ] | source-address [ mask { source-mask | source-mask-length } ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { include | exclude | match } { interface-type interface-number | register | none } | { statistics | verbose } ] * command to check the MFIB.
  • Run the display multicast routing-table [ vpn-instance vpn-instance-name ] static [ config ] [ source-address { mask-length | mask } ] command to check the multicast static routing table.
  • Run the display multicast [ vpn-instance vpn-instance-name | all-instance ] routing-table [ group-address [ mask { group-mask | group-mask-length } ] | source-address [ mask { source-mask | source-mask-length } ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { include | exclude | match } { interface-type interface-number | register | none } ] * [ outgoing-interface-number [ number ] ] command to check the multicast routing table.
  • Run the display multicast [ vpn-instance vpn-instance-name | all-instance ] rpf-info source-address [ group-address ] [ rpt | spt ] command to check the reverse path forwarding (RPF) route.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069332

Views: 19765

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next