No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Upper and Lower Alarm Thresholds for PIM Entries

Configuring the Upper and Lower Alarm Thresholds for PIM Entries

Context

A device supports a limited number of Protocol Independent Multicast (PIM) entries. After the number of PIM entries reaches the maximum value, no more PIM entries can be created. As a result, some multicast traffic cannot be forwarded. To facilitate network operation and maintenance, configure the upper and lower alarm thresholds for PIM entries. PIM entry alarms and clear alarms help you learn PIM entry usage in a timely manner. You can flexibly adjust the alarm thresholds for PIM entries based on actual service requirements.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run multicast-mib

    The multicast management information base (MIB) view is displayed.

  3. Run pim { star-group-number | source-group-number } threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value

    The upper and lower alarm thresholds for PIM entries are configured.

    Note that:

    • star-group-number indicates that the alarm thresholds are set for PIM (*, G) entries.
    • source-group-number indicates that the alarm thresholds are set for PIM (S, G) entries.
    • upper-limit-value specifies the upper alarm threshold. If the proportion of existing PIM entries to the maximum number reaches this threshold, a PIM entry alarm is reported.
    • lower-limit-value specifies the lower alarm threshold. If the proportion of existing PIM entries to the maximum number falls below this threshold, a PIM entry clear alarm is reported.
    • upper-limit-value must be greater than lower-limit-value.

    By default, upper-limit-value is 80% and lower-limit-value is 75%.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069332

Views: 22030

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next