No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Multicast Network Management

Enabling Multicast Network Management

Context

Before configuring basic functions of multicast network management, enable multicast network management on the router managed by the NMS.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run multicast-mib

    The multicast management information base (MIB) view is displayed and multicast network management is enabled.

    After this function is enabled, multicast MIB is bound to the public network instance.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069332

Views: 17756

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next