No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling IGMP

Enabling IGMP

Context

IP multicast routing is the prerequisite for all the multicast functions. Enable IP multicast routing before configuring any multicast protocol.

To configure IGMP functions on the router, first enable IGMP on interfaces connected to group members.

Procedure

  • Enabling IGMP in the public network instance
    1. Run system-view

      The system view is displayed.

    2. Run multicast routing-enable

      IP multicast routing is enabled.

      By default, the IP multicast routing function is disabled.

    3. Run interface interface-type interface-number

      The interface view is displayed.

    4. Run igmp enable

      IGMP is enabled on the interface.

      By default, IGMP is disabled on an interface.

  • Enabling IGMP in a virtual private network (VPN) instance

    A VPN instance must exist before you enable IGMP in the VPN instance.

    1. Run system-view

      The system view is displayed.

    2. Run ip vpn-instance vpn-instance-name

      The VPN instance view is displayed.

    3. Run multicast routing-enable

      IP multicast routing is enabled.

      By default, the IP multicast routing function is disabled.

    4. Run quit

      Return to the system view.

    5. Run interface interface-type interface-number

      The interface view is displayed.

    6. Run ip binding vpn-instance vpn-instance-name

      The interface is bound to a specified VPN instance.

      By default, an interface is a public network interface that is not associated with any VPN instance.

    7. Run igmp enable

      IGMP is enabled on the interface.

      By default, IGMP is disabled on an interface.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069332

Views: 17724

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next