No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for IGMP Snooping

Default Settings for IGMP Snooping

Table 9-4  Default settings for IGMP snooping

Parameter

Default Setting

IGMP snooping

Disabled

IGMP snooping version

By default, IGMP snooping can process IGMPv1 and IGMPv2 messages in a VLAN.

IGMP snooping interface learning

Enabled when IGMP snooping is enabled

IGMP snooping querier

Disabled

IGMP snooping general query interval

60s

IGMP snooping message suppression

Disabled

IGMP snooping SSM mapping

Disabled

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069332

Views: 18383

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next