No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic Multicast Network Management Functions

Configuring Basic Multicast Network Management Functions

Context

You can enable the alarm function for a specified module to monitor events of the specified protocol.

Pre-configuration Tasks

Before configuring multicast network management, complete the following tasks:
  • Configure basic multicast functions to ensure normal multicast transmission on the network.
  • Configure basic Simple Network Management Protocol (SNMP) functions to ensure normal communication with the network management system.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069332

Views: 24353

Downloads: 67

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next