No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NAT Multi-instance

NAT Multi-instance

NAT multi-instance allows hosts that belong to different MPLS VPNs but have the same private IP address to access a public network through the same egress device simultaneously. As shown in Figure 5-14, host A and host B have the same private IP address, but they belong to different VPNs. NAT associated with VPNs is enabled to differentiate the hosts in different VPNs. In this manner, host A and host B can access the public network server simultaneously.

Figure 5-14  Networking diagram for NAT multi-instance

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 33693

Downloads: 169

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next