No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Static Domain Name Resolution

Configuring the Static Domain Name Resolution


A static domain name resolution table is manually set up, describing the mappings between domain names and IP addresses. Some common domain names are added to the table. Static domain name resolution can be performed based on the static domain name resolution table. To obtain the IP address by resolving a domain name, the client searches the static domain name resolution table for the specified domain name. In this manner, the efficiency of domain name resolution is improved.


  1. Run system-view

    Access the system view.

  2. Run ip host host-name ip-address

    Specify a host name and an IPv4 address mapped to the host name.

    A host name is mapped to only a single IPv4 address. When you configure an IPv4 address for a host several times, only the IPv4 address configured at the latest is valid. Repeat 2 to allow the device to resolve several host names.

Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 43268

Downloads: 202

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next