No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the DHCPv6 Relay Agent Configuration

Verifying the DHCPv6 Relay Agent Configuration


  • Run the display dhcpv6 relay [ interface interface-type interface-number ]command to check the configuration of the interface enabled with the DHCPv6 relay function.
  • Run the display dhcpv6 server group [ group-name ] command to check the configuration of the DHCPv6 server group.
  • Run the display dhcpv6 relay statistics [ interface interface-type interface-number ] command to check the packet statistics of the DHCPv6 relay agent function.
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 32520

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next