No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Twice NAT

(Optional) Configuring Twice NAT

Context

If the external addresses of internal hosts overlap with addresses of external hosts, twice NAT can be configured. The overlapping addresses are replaced with temporary addresses and then translated by NAT so that the internal and external hosts can access each other.

  • An overlapping address pool specifies which internal IP addresses can overlap with public IP addresses. Twice NAT is performed only on the addresses in the overlapping address pool.
  • A temporary address pool specifies which temporary IP addresses can replace addresses in the overlapping address pool.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nat overlap-address map-index overlappool-startaddress temppool-startaddress pool-length length [ inside-vpn-instance inside-vpn-instance-name ]

    The mapping between the overlapping address pool and the temporary address pool is configured.

    NOTE:
    • A maximum of 255 addresses can be configured in the overlapping address pool and the temporary address pool.
    • When the VPN instance specified in the command is deleted, the configuration of twice NAT is also deleted.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 36611

Downloads: 186

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next