No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Self-Healing Function on the Timer of a NAT Module

Enabling the Self-Healing Function on the Timer of a NAT Module

Context

If the running timer of a NAT module is faulty, the NAT service fails and the device cannot work properly. After the self-healing function is enabled on the timer of a NAT module, the usage of the timer can be automatically detected. If a fault occurs on the timer, you can reset the device to rectify the fault and ensure the proper running of the device.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run set nat-session self-healing enable

    The self-healing function on the timer of a NAT module is enabled.

    By default, the self-healing function on the timer of a NAT module is disabled.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 35525

Downloads: 178

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next