No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of IPv6 DNS

Overview of IPv6 DNS

IPv6 DNS is a distributed database used in TCP and IP applications and completes resolution between IPv6 addresses and domain names.

Each host on the IPv6 network is identified by an IPv6 address. To access a host, a user must obtain the host IPv6 address first. It is difficult for users to remember IPv6 addresses of hosts. Therefore, host names in the format of strings are designed. In this way, users can use the simple and meaningful domain names instead of the complicated IPv6 addresses to access hosts by resolution of the DNS server on the network.

The device can function as an IPv6 DNS client and IPv6 DNS proxy or relay.

Figure 10-1  Typical networking of the IPv6 DNS Client

As shown in Figure 10-1, the router functions as an IPv6 DNS client and supports static and dynamic domain name resolution.

  • Static domain name resolution: Mappings between domain names and IPv6 addresses are configured manually. To obtain the IPv6 address by resolving a domain name, the DNS client searches the static domain name resolution table for the specified domain name.
  • Dynamic domain name resolution: Dynamic domain name resolution is implemented by a DNS server. The DNS server receives domain name resolution requests from DNS clients. The DNS server searches for the corresponding IPv6 address of the domain name in its DNS database. If no matching entry is found, it sends a query message to a higher-level DNS server. This process continues until the DNS server finds the corresponding IPv6 address or detects that the corresponding IPv6 address of the domain name does not exist. Then the DNS server returns a result to the DNS client.
    The router IPv6 domain name resolution system must support the following DNS query modes:
    • AAAA query
    • IPv6 PTR query.
    • A6 query

Functioning as the DNS Proxy or Relay

Figure 10-2  Functioning as the DNS proxy

As shown in Figure 10-2, an IPv6 DNS client on the LAN can connect to an external IPv6 DNS server through the router enabled with IPv6 DNS proxy or relay. After the external DNS server translates the domain name of the IPv6 DNS client to an IP address, the IPv6 DNS client can access the Internet.

IPv6 DNS relay is similar to IPv6 DNS proxy. The difference is that the IPv6 DNS proxy searches for DNS entries saved in the domain name cache after receiving DNS query messages from DNS clients. The IPv6 DNS relay, however, directly forwards DNS query messages to the DNS server, reducing the cache usage.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 32325

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next