No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the DHCPv6 DUID

Configuring the DHCPv6 DUID

Context

The DUID identifies a DHCPv6 device. Each DHCPv6 server or client has a unique DUID. DHCPv6 servers use DUIDs to identify DHCPv6 clients and DHCPv6 clients use DUIDs to identify DHCPv6 servers.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dhcpv6 duid { ll | llt | duid }

    A DUID is configured for the device.

    By default, the device generates a DUID based on the link-layer (LL) address.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 32880

Downloads: 166

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next