No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IP Address Assignment is Slow

IP Address Assignment is Slow

Possible Cause 1

Multiple DHCP servers are deployed on the network.


Determine whether the expected DHCP server allocates network parameters.


Configure DHCP snooping on the client. This configuration ensures that the client receives DHCP messages from only the trusted DHCP server. For details, see "Inserting the Option 82 Field in a DHCP Message" in Huawei AR100&AR120&AR150&AR160&AR200&AR1200&AR2200&AR3200&AR3600 Series V300R003 Configuration Guide - Security.

Possible Cause 2

Broadcast traffic suppression is configured and DHCP Discover messages exceeding the specified threshold are discarded.


Check whether broadcast traffic suppression is configured between the DHCP server and client. Run:
display flow-suppression interface


Adjust the broadcast traffic suppression threshold. Run:

Possible Cause 3

The network is under attack.


Check statistics about packets sent to the DHCP server's CPU and determine the MAC address at the source of the attack. Run:
display cpu-defend statistics


Add the MAC address at the source of the attack to the blacklist. For details, see "Configuring CPU Attack Defense" in Huawei AR100&AR120&AR150&AR160&AR200&AR1200&AR2200&AR3200&AR3600 Series V300R003 Configuration Guide - Security - Local Attack Defense Configuration.

Possible Cause 4

STP is enabled on the DHCP server or relay agent.


Check whether STP is enabled. Run:
display stp


To disable STP, run:
undo stp enable
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 36849

Downloads: 188

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next