No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
References for NAT

References for NAT

The following table lists the references of this document.



RFC 1631

The IP Network Address Translator (NAT)

RFC 2663

IP Network Address Translator (NAT) Terminology and Considerations

RFC 2709

Security Model with Tunnel-mode IPsec for NAT Domains

RFC 2993

Architectural Implications of NAT

RFC 3022

Traditional IP Network Address Translator (Traditional NAT)

RFC 3235

Network Address Translator (NAT)-Friendly Application Design Guidelines

RFC 3519

Mobile IP Traversal of Network Address Translation (NAT) Devices

RFC 3715

IPsec-Network Address Translation (NAT) Compatibility Requirements

RFC 3947

Negotiation of NAT-Traversal in the IKE

RFC 4008

Definitions of Managed Objects for Network Address Translators (NAT)

RFC 4787

Network Address Translation (NAT) Behavioral Requirements for Unicast UDP

Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 32408

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next