No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of IPv4

Overview of IPv4

This section describes the definition and purpose of IPv4.


Internet Protocol Version 4 (IPv4) is the core protocol in the TCP/IP protocol suite. IPv4 works at the network layer in the TCP/IP model. This layer corresponds to the network layer in the Open System Interconnection Reference Model (OSI RM). The network layer provides connectionless data transmission. Each IP datagram is transmitted independently.


IPv4 is used on the network layer between the data link layer and the transport layer. IPv4 shields the differences at the link layer and provides a uniform format for the data packets transmitted at the transport layer.

Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 32620

Downloads: 163

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next