No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the Function of Discarding Packets That Do Not Match ACL Rules

(Optional) Enabling the Function of Discarding Packets That Do Not Match ACL Rules

Context

After an ACL is associated with an NAT address pool, the device translates the source address of a data packet matching the ACL into an IP address in the NAT address pool. You can run the nat miss forward deny command to enable the function of discarding the packets that do not match the ACL rules bound to NAT.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nat miss forward deny

    The function of discarding packets that do not match ACL rules bound to NAT is enabled.

    By default, the function of discarding the packets that do not match the ACL rules bound to NAT is disabled on a device.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 36970

Downloads: 188

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next