No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Service

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document describes the concepts and configuration procedures of IP Service features on the device, and provides the configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for IP Performance

Default Settings for IP Performance

This section provides the default settings for IP performance.

Table 7-1 describes the default settings for IP performance.

Table 7-1  Default settings for IP performance

Parameter

Default Setting

Source IP address verification

Disabled

IP packet fragmentation on outbound interface

Disabled

Fast ICMP reply function

Enabled

Discarding ICMP packets whose TTL values are 1 on an LPU

Disabled

Discarding ICMP packets that carry options on an LPU

Disabled

Discarding ICMP destination unreachable packets

Disabled

TCP SYN-Wait timer

75s

TCP FIN-Wait timer

675s

Socket receive/send buffer size

8k bytes

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069333

Views: 32504

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next