Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for MPLS TE
Table 4-29 Default settings for MPLS TE
| Parameter | Default Setting |
|---|---|
| MPLS TE | Disabled |
| RSVP TE | Disabled |
| Metric type in path selection for tunnels | TE |
| Affinity property of tunnels | The values of affinity property and mask are both 0x0. |
| Maximum reservable link bandwidth | 0 |
| Tunnel priority | The values of setup priority and hold priority are both 7. |
| Route and label recording | Disabled |
| Route pinning | Disabled |
| Waiting period from a TE tunnel going Down to the network informed of the change | 0 |