No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration

Context

You can run commands to verify that IPv4 multicast original flow statistics exporting has been configured correctly.

Procedure

  • Run the display ip netstream cache command to check information about flows in NetStream cache.
  • Run the display ip netstream statistic command to check the NetStream statistics.
  • Run the display ip netstream { all | global } command to check the NetStream configuration for IPv4 multicast original flows.
  • Run the display traffic classifier user-defined [ classifier-name ] command to check the traffic classifier configuration.
  • Run the display traffic behavior { system-defined | user-defined } [ behavior-name ] command to check the traffic behavior configuration.
  • Run the display traffic policy user-defined [ policy-name [ classifier classifier-name ] ] command to check the traffic policy configuration.

  • Run the display traffic-policy applied-record [ policy-name ] command to check the application record of a specified traffic policy.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 33468

Downloads: 189

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next