No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Connecting Routers (without OSP Daughter Card) to Controller

Example for Connecting Routers (without OSP Daughter Card) to Controller

Networking Requirements

On a network with complex topology and high-density devices, you can use a controller to manage network devices.

In Figure 15-14, the controller is deployed on a server and AR routers are located on the customer network.
Figure 15-14  Routers communicate with the controller using NETCONF

Configuration Roadmap

The configuration roadmap is as follows:

  1. Configure an IP address for the management interface on each AR to implement reachable route between the AR and controller cloud management platform.
  2. Connect the AR to the controller cloud management platform.
  3. Add the AR to the controller.

Procedure

  1. Configure an IP address for the management interface of the AR.

    <Huawei> system-view
    [Huawei] sysname RouterA
    [RouterA] interface gigabitethernet 0/0/0
    [RouterA-GigabitEthernet0/0/0] ip address 10.1.1.1 24
    [RouterA-GigabitEthernet0/0/0] quit

  2. Connect the AR to the controller cloud management platform.

    [RouterA] agile controller host 10.1.1.3 port 4999
    [RouterA] quit

  3. Add the AR to the controller.

    1. Log in to the controller using an administrator account.
    2. Choose Resource > Device in the main menu.
    3. In the navigation tree, choose Device.
    4. Click Add Device and enter the ESN (21500102222SF1900004), as shown in Figure 15-15.
      Figure 15-15  Add Device

  4. Verify the configuration.

    1. Log in to the controller using an administrator account.
    2. Choose Resource > Device in the main menu.
    3. In the navigation tree, choose Device.
    4. On the Device page, the device status is normal, indicating that the AR has successfully connected to the controller, as shown in Figure 15-16.
      Figure 15-16  Displaying device status

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 29719

Downloads: 175

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next