No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU
Support Documentation

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IPv4 Multicast Original Flow Statistics Exporting

Configuring IPv4 Multicast Original Flow Statistics Exporting

After the IPv4 multicast original flow statistics exporting is configured, the NDE collects statistics about IPv4 multicast flows and exports the statistics about each flow to the NetStream server for further analysis.

Pre-configuration Tasks

Before configuring the IPv4 multicast original flow statistics exporting, complete the following tasks:

  • Set physical parameters of interfaces.
  • Set the link-layer attributes of each interface.
Translation
简体中文
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 33935

Downloads: 193

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next
Enterprise APP

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.