No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of AR and Controller Interconnection Configuration

Overview of AR and Controller Interconnection Configuration


Controller: a cloud management platform that delivers service configurations, monitors performance, and provides fault location to network devices using the Network Configuration Protocol (NETCONF).

NETCONF: provides a mechanism to install, maintain, and delete configurations of network devices. You can use NETCONF to obtain configurations and status of the network devices. NETCONF-enabled network devices provide standard Application Programming Interfaces (APIs) for application developers to develop customized network management software on third-party software. This network management software facilitates network device management.


As network scale and complexity increase, the traditional Simple Network Management Protocol (SNMP) cannot meet requirements for easy management (especially configuration management) of complex networks. Extensible Markup Language (XML)-based NETCONF is an effective method to address the network configuration and management problems. After devices are connected to the controller, you can log in to the controller to configure and manage the devices on the graphic user interface (GUI).

Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 30771

Downloads: 177

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next