No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NetStream Interface Index Length

Configuring NetStream Interface Index Length


The NMS obtains interface information of exported packets according to the interface indexes in NetStream packets. Interface indexes consist of either 16 or 32 digits. NMS devices from different vendors may use different numbers of digits in interface indexes. The number of digits in the interface index used by the device must be the same as the number of digits in the interface index used by the NMS. For example, if the NMS can parse 32-digit interface indexes, set the number of digits in the interface indexes contained in exported NetStream packets to 32.


  1. Run system-view

    The system view is displayed.

  2. Run ip netstream export index-switch index-switch

    The number of digits in the interface index for exported NetStream packets is set.

    By default, the NetStream exported packets contain 16-digit interface indexes.

Verifying the Configuration

Run the display ip netstream { all | global } command to check the NetStream configuration.

Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 42235

Downloads: 217

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next