No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Flow Mirroring

Flow Mirroring

Flow mirroring enables the device to copy the packets matching configured traffic classification rules to an observing port for analysis and monitoring. As shown in Figure 10-3, the mirrored port copies service flow 2 matching traffic classification rules to the observing port, and then the observing port forwards the copy of service flow 2 to the monitoring device.

Figure 10-3  Networking of flow mirroring

Flow mirroring is a traffic action. Actually, a traffic policy defining flow mirroring is applied to the system, a VLAN, or an interface. For details about the traffic policy, see "MQC Configuration" in Huawei AR100&AR120&AR150&AR160&AR200&AR1200&AR2200&AR3200&AR3600 Series Enterprise Routers - CLI-based Configuration - Configuration Guide - QoS Configuration.

Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 29993

Downloads: 177

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next