No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for TWAMP Light

Application Scenarios for TWAMP Light

In Figure 14-3, users access the network through routers. TWAMP Light is run between router 1 and router 2. Router 1 functions as the controller and router 2 functions as the responder. After a measurement service is created on the controller and responder, the IP performance of the network can be measured. You can obtain the network running statistics and service quality.

Figure 14-3  Know service quality through TWAMP Light
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 41295

Downloads: 213

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next