No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for NetStream

Default Settings for NetStream

Table 12-3 lists the default settings of NetStream parameters.
Table 12-3  Default settings for NetStream


Default Setting

NetStream packet sampling

Packet-based regular sampling with a sampling rate of 100.

Active aging time

30 minutes

Inactive aging time

30 seconds

FIN- and RST-based aging


Byte-based aging


Version of exported packets carrying IPv4 unicast original flow statistics


Version of exported packets carrying IPv4 multicast original flow statistics


Version of exported packets carrying IPv4 aggregation flow statistics


Version of exported packets carrying IPv4 flexible flow statistics


Version of exported packets carrying statistics about flows that fail the RPF check


Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 41246

Downloads: 211

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next