No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP Configuration

SNMP Configuration

This chapter describes how to configure Simple Network Management Protocol (SNMP) to manage network elements.


The Simple Network Management Protocol (SNMP) is a standard network management protocol widely used on TCP/IP networks. The SNMP framework uses a central computer where the network management software is installed to manage network elements. This central computer is called network management station (NMS). SNMP provides three SNMP versions: SNMPv1, SNMPv2c, and SNMPv3. An SNMP system can run one or more SNMP versions.

A lack of authentication capabilities in SNMPv1 and SNMPv2c results in vulnerability to security threats, so SNMPv3 is recommended.
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 30808

Downloads: 177

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next