No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Versions for Exported Packets

Configuring Versions for Exported Packets

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the ip netstream record record-name command to enter the flexible flow statistics template view.

    NOTE:
    The flexible flow statistics template must be the same as that in Configuring a Flexible Flow Statistics Template.

  3. Run the export version version command to set the version of exported packets carrying flexible flow statistics.

    By default, the packets carrying flexible flow statistics are exported in the format of V9.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 29611

Downloads: 173

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next