No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring an IP Accounting Rule

(Optional) Configuring an IP Accounting Rule

Context

If you have enabled the common IP accounting function but do not configure IP accounting rules, all packet information is recorded in the mismatched table.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ip accounting rule ip-address { mask | mask-length }

    An IP accounting rule is configured.

    By default, no IP accounting rule is configured.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 29695

Downloads: 175

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next