No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the NQA Client to Send Traps to the NMS After Test Results Are Sent to the FTP

(Optional) Enabling the NQA Client to Send Traps to the NMS After Test Results Are Sent to the FTP

Context

When an FTP server is used to save NQA test results, the NQA client sends test results to the specified FTP server through FTP. After test results are sent to the FTP server, the NQA client sends a trap to the NMS if it is configured to do so.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa-ftp-record trap-enable

    The NQA client is configured to send a trap to the NMS after NAQ test results are successfully sent to the FTP server.

    By default, the NQA client sends no trap when NQA test results are successfully sent to the FTP server.

    NOTE:
    • The NQA client generates no trap when transfer of test results succeeds for the first time. It generates a trap for every successful transfer since the second successful transfer.

    • The NQA client generates a trap only when a text file is completely transferred. That is, the NQA client generates an alarm only after the number of test results in the file or the interval reaches the configured value and the file saving is finished.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 33922

Downloads: 193

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next