No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NetStream Statistics Collection

Configuring NetStream Statistics Collection

Context

Aggregation flow statistics can be exported only when you have enabled flow statistics collection on an interface.

If you configure interface-based flow statistics collection and traffic policy-based flow statistics collection simultaneously on one direction of the same interface, one packet is collected only once.

Procedure

  • Configuring interface-based flow statistics collection
    1. Run system-view

      The system view is displayed.

    2. (Optional) Run ip netstream pre-classify enable

      The pre-classify function is enabled globally.

      By default, the pre-classify function is disabled globally.

    3. Run interface interface-type interface-number [.subinterface-number ]

      The interface view is displayed.

    4. Run ip netstream { inbound | outbound }

      The NetStream function is enabled on the interface to collect statistics about aggregation flows.

      By default, NetStream is disabled for aggregation flows.

  • Configuring traffic policy-based flow statistics collection
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number [.subinterface-number ]

      The interface view is displayed.

    3. Apply the traffic policy to an interface. You can apply one or more types of traffic policy to one direction of an interface.
      • Run traffic-policy policy-name { inbound | outbound }

        A common traffic policy is applied to the outbound or inbound direction on the interface.

        By default, no common traffic policy is applied to an interface.

      • Run traffic-policy policy-name { inbound | outbound } preprocess

        A preprocessing traffic policy is applied to the outbound or inbound direction of the interface.

        By default, no preprocessing traffic policy is applied to an interface.

      • Run traffic-policy policy-name { inbound | outbound } firstprocess

        A preferential processing traffic policy is applied to the outbound or inbound direction of the interface.

        By default, no preferential processing traffic policy is applied to an interface.

    Before applying a traffic policy to an interface, configure one according to Configuring NetStream Sampling.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 29544

Downloads: 173

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next