No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic LLDP Functions

Configuring Basic LLDP Functions

When LLDP is configured on devices, the NMS can obtain detailed information such as the network topology, device interface status, and management address.

Pre-configuration Tasks

Before configuring LLDP, ensure that a reachable route exists between the local device and NMS, and configure the Simple Network Management Protocol (SNMP).

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 33730

Downloads: 189

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next