No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Connecting AR routers to Controller Through DHCP

Example for Connecting AR routers to Controller Through DHCP

Networking Requirements

On a network with complex topology and high-density devices, you can use a controller to manage network devices.

In Figure 15-11, the controller is deployed on the server, the AR routers and DHCP server are located on the user network, and the AR routers and controller can communicate with each other. The AR routers function as DHCP clients to obtain controller information and management IP address from the DHCP server.
Figure 15-11  The AR routers communicate with the controller using DHCP

Configuration Roadmap

The configuration roadmap is as follows:

  1. Configure the gateway address and Option 148 on the DHCP server (for example, the DHCP server is an AR routers).
  2. Add AR routers to the controller.
  3. On the controller, check the connection status between AR routers and controller.

Procedure

  1. Configure the DHCP server.

    # Enable DHCP.
    <Router> system-view
    [Router] dhcp enable
    
    # Enable the DHCP server to assign IP addresses to clients from the global address pool.
    [Router] interface gigabitEthernet 0/0/0
    [Router-GigabitEthernet0/0/0] ip address 10.1.1.10 255.255.255.0
    [Router-GigabitEthernet0/0/0] dhcp select global
    [Router-GigabitEthernet0/0/0] quit
    
    # Configure an IP address pool.
    [Router] ip pool global1
     Info:It's successful to create an IP address pool.
    [Huawei-ip-pool-global1] gateway-list 10.1.1.10
    [Huawei-ip-pool-global1] network 10.1.1.0 mask 255.255.255.0
    # Configure Option 148.
    [Huawei-ip-pool-global1] option 148 ascii ac_addr=10.1.2.1:4999
    [Huawei-ip-pool-global1] force insert option 148
    

  2. Add the AR routers to the controller.

    1. Log in to the controller using an administrator account.
    2. Choose Resource > Device in the main menu.
    3. In the navigation tree, choose Device.
    4. Click Add Device and enter the ESN (21500102222SF1900004), as shown in Figure 15-12.
      Figure 15-12  Add Device

  3. Verify the configuration.

    1. Log in to the controller using an administrator account.
    2. Choose Resource > Device in the main menu.
    3. In the navigation tree, choose Device.
    4. On the Device page, the device status is normal, indicating that the AR routers has successfully connected to the controller, as shown in Figure 15-13.
      Figure 15-13  Displaying device status

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 30044

Downloads: 177

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next