No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Service Diagnosis

Maintaining Service Diagnosis


After service diagnosis is enabled and a diagnosis object is created on a device, the device creates a diagnosis instance when a user matching the attributes of the diagnosis object gets online. If the device diagnoses services of multiple users, it creates a diagnosis instance for each user, which occupies a large amount of system resources. Therefore, the device need to automatically delete diagnosis instances when corresponding users get offline. The service diagnosis module will fail to detect that some users are offline because these users got offline abnormally. The diagnosis instances created for these users are not deleted and occupy system resources. The device provides an aging mechanism for service diagnosis. When the aging time is reached, the device automatically deletes diagnosis instances to reclaim resources.

In addition to the preceding two methods you can run the reset trace instance command to clear all the diagnosis instances on the device.

After all the diagnosis instances are cleared using the reset trace instance command, properly running diagnosis instances are also deleted. Exercise caution when you run the reset trace instance command.


  1. Run the system-view command to display the system view.
  2. Run the reset trace instance command to clear all diagnosis instances on the device.
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 41302

Downloads: 213

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next