No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for CWMP

Application Scenarios for CWMP

This section describes the applicable scenario of CWMP.

As shown in Figure 5-3, enterprise branches connect to the Internet through the enterprise gateway router. CWMP is deployed between the enterprise headquarters and branches. The router functions as a CPE. The enterprise headquarters control and manage the router using an ACS. After connecting to the router, the ACS manages the system startup file and configuration file for the router, configures the router, monitors the router status and performance, and diagnoses router faults.

Figure 5-3  Applicable scenario of CWMP

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 29497

Downloads: 172

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next