No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for IP FPM

Licensing Requirements and Limitations for IP FPM

Involved Network Elements

None

Feature Limitations

  • IP FPM depends on NTP clock synchronization. If clocks are not synchronized, statistics cannot be collected or the statistical result is abnormal.

  • IP FPM does not support the SD-WAN solution in which double gateways and three upstream WAN ports are deployed.

  • IP FPM delay measurement is not reliable. When the packet loss rate on a link is high, there is a possibility that the detection result is inaccurate.

  • In the SD-WAN solution, IP FPM detection result can be reported to the SPR. It takes more than 20s to report detection results for the first time.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 34144

Downloads: 196

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next