No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FTP Test

FTP Test

The NQA FTP test is performed using TCP. It helps you determine whether an FTP client can establish a connection with a specified FTP server and measure the time taken to download a specified file from or upload a specified file to the server.

The NQA FTP test obtains the minimum, maximum, and average time of the following:

  • Control connection setup

    This is the time taken by the client (RouterA) to set up a TCP control connection with the FTP server through the three-way handshake and to exchange signals through the control connection.

  • Data connection setup

    This is the time taken by the client to download a specified file from or upload a specified file to the FTP server through the data connection.

Figure 7-3  Network for FTP test

With an FTP test, the following information can be calculated based on the packets from clients:

  • Minimum, maximum, and average time to set up a control connection

  • Minimum, maximum, and average time to set up a data transmission connection

FTP supports file uploads and downloads. During a file download test, the downloaded file is not actually saved to the local file system. The test only calculates the time taken to download the file, after which it automatically releases the occupied memory. During a file upload test, a test file (with fixed size and contents), not local files, is uploaded to the FTP server. The name of the file to be uploaded is specified by the user and the data in the file is specified by the system. If a file with the specified name already exists on the server, the existing file is overwritten. The uploaded file is not deleted after the FTP test. FTP tests are independent of the local file system.

FTP test results and historical records are collected in test instances. You can run commands to view the test results and historical records.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 30784

Downloads: 177

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next