No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
A Busy Record Exists in the UDP Jitter Test Result

A Busy Record Exists in the UDP Jitter Test Result

Context

If the UDP jitter test result has busy records, the value of the System busy operation number field in the display nqa results command output is not 0. This fault is commonly caused by one of the following: The VPN route instance that is configured in the UDP Jitter test instance is unreachable.

Procedure

  1. Run the display nqa-agent admin-name test-name [ verbose ] command on the NQA client or run the display this command in the NQA test instance view to check whether the VPN instance is configured.
  2. Run the ping -vpn-instance vpn-instance-name command on the NQA client to check whether the destination address is reachable.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 29473

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next