No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the CWMP Uploading Function

(Optional) Configuring the CWMP Uploading Function


After a connection is set up between the CPE and the ACS, you can configure the CPE to upload the currently loaded configuration file to the ACS. This function is used to back up configuration files.


  1. Run system-view

    The system view is displayed.

  2. Run cwmp

    The CWMP view is displayed.

  3. (Optional) Run cwmp escape-character

    A character to be translated is added.

    • Currently, only 30 characters to be translated are supported. If more than 30 characters to be translated are configured, an error message is displayed.
    • To make character translation take effect, run the cwmp escape-character enable command.

  4. (Optional) Run cwmp escape-character enable

    The character translation function is enabled.

    By default, character translation is disabled.

  5. Run cwmp request upload current-configuration

    The CPE is configured to upload the currently loaded configuration file to the ACS.

Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 42026

Downloads: 217

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next