No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of TWAMP Light

Overview of TWAMP Light

Definition

Two-Way Active Measurement Protocol (TWAMP) Light is a light version of TWAMP, which is defined in RFC 5357. TWAMP Light measures the round-trip performance of an IP network by using simplified control protocol to establish test sessions.

Purpose

Traditional IPRAN networks lack an effective, simple, and universal OAM performance measurement tool. Most vendors use proprietary features, such as Network Quality Analysis (NQA), to measure performance of IP networks. However, NQA is not a public protocol. The devices running NQA from different vendors cannot interwork with each other, and NQA is difficult to deploy. The IETF IP performance monitoring (IPPM) team proposed a series of protocols to address the issues in IP network performance measurement. TWAMP is one of the IP network performance measurement tools applied to IP networks.

TWAMP defines a standard method for across-network performance measurement. It includes two structures: standard structure and light structure (TWAMP Light). TWAMP Light allows a router to send detection packets to itself and the control modules in the TWAMP Light structure can be deployed in a centralized manner. This reduces requirements on the reflector and facilitates reflector deployment.

Benefits

TWAMP Light is an IP link detection technology. It can monitor network quality, including delay, jitter, and packet loss, and is easy to deploy and use.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 34630

Downloads: 196

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next