No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing IP Accounting Statistics

Clearing IP Accounting Statistics


Before collecting packet statistics, you should clear existing statistics records; otherwise, statistics are inaccurate. If you do not clear them, the records will not be deleted until the aging time expires.

IP accounting statistics cannot be restored after they are cleared. Exercise caution when you use the command.


  1. Run the reset ip accounting { all | matched | mismatched | precedence } command in the user view to clear IP accounting statistics.
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 34095

Downloads: 195

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next