No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Interface Initialization Delay

(Optional) Configuring the Interface Initialization Delay

Context

Interface initialization delay refers to the delay before LLDP is re-enabled on an interface. The delay suppresses the topology flapping caused by frequent LLDP status changes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run lldp restart-delay delay

    The interface initialization delay is set.

    The default delay is 2 seconds.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 30195

Downloads: 177

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next