No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the network management feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration

  • Run the display ip pool interface interface-pool-name command in any view to check the IP addresses of the Host OS virtual interface and the default virtual interface of OSP daughter card.
  • Run the display nat server command in any view to check the mapping addresses on Host OS and OSP daughter card.
  • Run the display agile-controller status command in any view to check the connection status between the device and controller.
Updated: 2019-03-06

Document ID: EDOC1100069336

Views: 40993

Downloads: 211

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next