No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Creating the Default MD

(Optional) Creating the Default MD

The default MD must be of a higher level than all MDs to which MEPs configured on the local device belong. In addition, the default MD must be of the same level as the high-level MD. The default MD transmits high-level CCMs.

Context

Perform the following operations on the device where Ethernet CFM needs to be configured.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run cfm default md [ level level ]

    The default MD is created and the default MD view is displayed.

    Only one default MD can be created on each device.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069338

Views: 14281

Downloads: 43

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next