No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a MEP

Creating a MEP

Context

MEPs define the scope and edge of an MA. CFM supports Continuity Check (CC), Loopback (LB), and Linktrace (LT) functions on end-to-end links between MEPs.

MEPs are classified into the local MEP and RMEPs.

MEPs are classified into inward- and outward-facing MEPs based on the MEP direction. Device interfaces at both ends of the direct or end-to-end link must be Layer 2 interfaces.

Perform the following operations on each edge device in an MA.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run cfm md md-name

    The MD view is displayed.

  3. Run ma ma-name

    The MA view is displayed.

  4. Run mep mep-id mep-id interface interface-type interface-number { outward | inward }

    A MEP is created.

Follow-up Procedure

  • To create multiple MEPs in an MA, repeat step 4.

  • To create MEPs in multiple MAs, repeat step 3 and step 4.

NOTE:
Do not configure level-0 MEPs on intermediate devices. To specify the level of a MEP, run the cfm md md-name [ level level ] command.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069338

Views: 14228

Downloads: 43

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next