No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interface Backup in Active/Standby Mode

Interface Backup in Active/Standby Mode

As shown in Figure 2-3, the enterprise egress gateway RouterA connects to the Internet through ADSL interface ATM3/0/0. To ensure that enterprise users can connect to the IP network when the ADSL interface is faulty, the link of a 3G interface is used as the backup link. When the active interface is faulty, the backup link is started to transmit services.

Figure 2-3  Interface backup application

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069338

Views: 14133

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next