No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Static BFD with Automatically Negotiated Discriminators

Configuring Static BFD with Automatically Negotiated Discriminators

Pre-configuration Tasks

When the remote device uses dynamic BFD and the local device wants to communicate with the remote device and detect static routes, you can create a BFD session with automatically negotiated discriminators. This function applies to networks that use static routes to implement Layer 3 connectivity.

Before configuring a BFD session with automatically negotiated discriminators, complete the following task:

  • Configure an IP address for the Layer 3 interface.

Configuration Process

Figure 6-17  Configuring static BFD with automatically negotiated discriminators

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bfd

    BFD is enabled globally and the BFD view is displayed.

    By default, BFD is disabled globally.

  3. Run quit

    Return to the system view.

  4. Run bfd session-name bind peer-ip ip-address [ vpn-instance vpn-name ] [ interface interface-type interface-number ] source-ip ip-address auto

    A BFD session with automatically negotiated discriminators is created.

    By default, BFD binding is not created.

    NOTE:
    • You must specify a source IP address.

    • You must specify the peer IP address, which cannot be a multicast IP address.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069338

Views: 13869

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next