No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring an Interface or Bridge MAC Address as the Source MAC Address in an OAMPDU

(Optional) Configuring an Interface or Bridge MAC Address as the Source MAC Address in an OAMPDU

Context

OAMPDUs support interface or bridge MAC addresses as source MAC addresses.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run efm src-mac { port | bridge }

    An interface or bridge MAC address is configured as the source MAC address in an OAMPDU.

    By default, a bridge MAC address is used as the source MAC address in an OAMPDU.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069338

Views: 13932

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next