No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Reliability

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides guidance for configuring reliability services, including interface backup, BFD, VRRP, and EFM.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Association Between EFM and CFM

Verifying the Configuration of Association Between EFM and CFM

To verify whether the configuration is successful, check whether CFM sends fault alarms to the remote end.

Procedure

  • When Ethernet OAM running between CE1 and PE1 detects faults, Ethernet CFM notifies Ethernet OAM running between CE2 and PE2 of the fault.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069338

Views: 14099

Downloads: 40

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next